Philippi BTM 2 Battery and Tank Monitor
Everything at a glance: The Philippi BTM 2 combines precise battery monitoring, flexible tank measurement, and the monitoring of your onboard charger in one compact flush-mount device. The intuitive 3.5″ color TFT touchscreen display with automatic brightness sensor makes the status of your power supply and your tanks clearly readable at all times – and thanks to the NMEA 2000 interface, all data is also displayed on your plotter.
Tip: For the NMEA 2000 connection, the N2K cable (sold separately) and a T-connector (Art. 5 0411 1149) are required. Those monitoring 48 V systems combine the BTM 2 with the SHE 348 shunt. For deep discharge protection of lithium batteries, the potential-free changeover contact can be directly connected to the remote-controlled battery main switch FBR 265.
Couldn't load pickup availability
- 3.5″ color TFT touchscreen with light sensor – automatically adjusts to ambient light
- NMEA 2000 interface transmits battery and tank data to compatible plotters and displays
- Wide voltage range 8–64 V DC – also monitors 48 V lithium and lead-acid battery systems
- Measures voltage, current, state of charge, remaining time, temperature, and historical cycle data of the house battery
- Monitors up to 2 additional starter or bow batteries and solar yield via additional measurement shunt
- Potential-free alarm relay contact for capacity-dependent deep discharge protection – especially important for lithium
| Operating voltage | 8–64 V DC |
|---|---|
| Current consumption | max. 70 mA @ 12 V |
| Standby consumption | 6 mA |
| Display | 3.5″ color TFT touchscreen with brightness sensor |
| Interface | NMEA 2000 |
| Battery monitoring | Voltage, current, state of charge, remaining time, temperature, charge cycles, deep discharges, average depth of discharge |
| Additional batteries | up to 2 starter or bow thruster batteries |
| Solar yield measurement | Possible with additional power measurement shunt (separate) |
| Tank sensors (Philippi) | TGT/TGW, UTV, TDS/TDN, DFS |
| Tank sensors (external) | 10–180 Ω / 240–33 Ω / 0–5 V / 0–10 V / 4–20 mA |
| Tank geometry | Adaptation to non-linear tank shapes possible |
| Alarm/relay output | Potential-free changeover contact (deep discharge protection) |
| ACE charger monitoring | Via ACE-LIN interface (separate): Charge phase, mains voltage, battery temperature, charging current, power setting, silent mode |
| Dimensions | 105 × 105 × 35 mm |
| Mounting cutout | 88 × 88 mm |
philippi
Gewicht (ca.): 0.37 kg
Herstellerinformationen gemäß GPSR:
PHILIPPI ELEKTRISCHE SYSTEME GMBHNECKARAUE 19
71686 REMSECK
INFO@PHILIPPI-ONLINE.DE
Mail:
